Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Correct identification of materials, if applicable
• Accurate interpretation of assembly plan and steps
• Correct visualization of the product to be made
• Good organizational skills

Tasks

• Receive instructions from the person in charge.
• Read the production specifications (assembly methods, fastening materials, assembly sequence, part dimensions, etc.) or the shipping labels.
• Verify the availability of the materials required (fastening materials such as nails and screws; assembly hardware such as slides, fittings or hinges; raw materials such as sealants and glue, etc.).
• Verify the availability and quality of all the parts needed to assemble the product.
• Set aside all irregular parts and place them in the designated areas.
• Check the operating condition of the tools or equipment.
• Ensure that the personal protective equipment is in good working order and put it on.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Proper application of work techniques
• Proper use of tools and equipment

Tasks

• Select materials (parts or profiles made of jointed or unjointed wood or cladding materials).
• Identify colour defects, cracks, warping, etc.
• Use templates.
• Mark pieces.
• Cut wood pieces or profiles or cladding materials using a conventional, automatic or numerically controlled radial saw.
• Place wood profiles in the tenoning machine to reshape the tenons.
• Check the quality of the work.
• Place the piece or profiles on the cart.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Compliance with assembly sequence
• Proper application of work techniques
• Proper use of tools and equipment
• Demonstration of ability to work in a team

Tasks

• Select the components (sill, head and jambs).
• Prepare the assembly table.
• Apply sealant to the tips of the frames or glue to the tips of the sashes.
• Place the sill, head or jambs of the frames or sashes in the press and turn on the pneumatic clamps.
• Staple the components of the frames or nail the components of the sashes.
• Check the squareness of the frames or sashes.
• Clean off excess sealant or glue.
• Complete the assembly: screw the hardware, attach the mouldings, insert weatherstripping, etc.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Proper installation direction
• Proper application of work techniques
• Proper use of tools
• Meticulous work
• Vigilance

Tasks

• Select the doorlite or sealed unit.
• Insert the doorlite and seal the joint, or glue the glazing tape before inserting the sealed unit.
• Install the cross bar, glazing strips or mouldings.
• Install the grille.
• Apply a final coat of sealant to the outside joint.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Compliance with order of assembly
• Proper application of work techniques
• Proper use of tools and equipment
• Demonstration of ability to work in a team

Tasks

• Place the assembled door or window frame on a work bench or in a press.
• Place the door or window sash inside the frame.
• Screw the hinges onto the door frame or the fixed sash to the window frame, or attach the hardware of the operable sash.
• Make the necessary adjustments.
• Insert the window screen.
• Match up the windows.
• Check the quality of the product and remove irregular products.
• Touch up the paint or stain, as needed.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Proper application of work techniques
• Proper use of equipment

Tasks

• Affix the company logo and stickers (CSA, Energy Star, etc.).
• Cover with protective cardboard or attach wooden corner protectors or any other protective device.
• Include the installation instructions and necessary hardware.
• Perform the final quality check (cleanliness, squareness, condition of operable parts, etc.).
• Place the product on the tray of the wrapping machine and start the machine.

Performance criteria

• Observance of occupational health and safety rules
• Observance of environmental laws and regulations
• Compliance with work instructions
• Observance of maintenance schedule
• Compliance with the storage or warehousing plan
• Proper application of work techniques
• Concern for using materials sparingly
• Order and cleanliness

Tasks

• Put away the parts or products in their designated areas.
• Clean the tools and equipment.
• Sort and put away all materials used.
• Clean and sweep the work areas.
• Salvage scrap materials for recycling and dispose of waste.
• Report signs of breakage to the maintenance service or person in charge.