Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Correct identification of materials, if applicable
• Accurate interpretation of assembly plan and steps
• Correct visualization of the product to be made
• Good organizational skills

Tasks

• Receive instructions from the person in charge.
• Read the production specifications (assembly methods, fastening materials, assembly sequence, part dimensions, etc.) or the shipping labels.
• Verify the availability of the materials required (fastening materials such as nails and screws; assembly hardware such as slides, fittings or hinges; raw materials such as sealants and glue, etc.).
• Verify the availability and quality of all the parts needed to assemble the product.
• Set aside all irregular parts and place them in the designated areas.
• Check the operating condition of the tools or equipment.
• Ensure that the personal protective equipment is in good working order and put it on.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Proper application of work techniques
• Proper use of tools and equipment

Tasks

• Select the profiles.
• Identify defects.
• Insert PVC profiles into the carousel turning station.
• Configure the equipment (profile length, location of holes, etc.).
• Test a first piece, if applicable.
• Start production and monitor its progress.
• Remove the PVC profiles.
• Affix the appropriate labels to the profiles.
• Place the sets of profiles for the window sashes or frames in the appropriate places on the cart.
• Write the lot number on the cart and move it to the next workstation.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Compliance with order of assembly
• Proper application of work techniques
• Proper use of tools and equipment
• Proper time management
• Quick execution

Tasks

• Take a set of four profiles (window sash or frame) and place them in the welding machine.
• Start up the equipment.
• Monitor the cold welding operation, the sash or frame output and subsequent input into the cleaning machine.
• Deburr (trim) the sashes or frames using a Don Carlos (moon) knife.
• Check the quality of the product and remove irregular sashes or frames.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Proper installation direction
• Proper application of work techniques
• Proper use of tools
• Meticulous work
• Vigilance

Tasks

• Select the doorlite or sealed unit.
• Insert the doorlite and seal the joint, or glue the glazing tape before inserting the sealed unit.
• Install the cross bar, glazing strips or mouldings.
• Install the grille.
• Apply a final coat of sealant to the outside joint.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Compliance with procedures or production plan
• Compliance with order of assembly
• Proper application of work techniques
• Proper use of tools
• Proper time management
• Quick execution
• Demonstration of ability to work in a team

Tasks

• Install the operator and screw in the hardware (latch, opening mechanism, etc.).
• Take the sash and insert it into the frame.
• Insert reinforcements in the profiles, if applicable.
• Hammer in the profiles so that they fit together snugly.
• Prepare the mullion and screw it to the window frame.
• Hammer in the outside mouldings.
• Apply sealant.
• Insert weatherstripping into the operable sash.
• Check the quality of the product and remove irregular windows.
• Detect any problems and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Proper application of work techniques
• Proper use of equipment

Tasks

• Affix the company logo and stickers (CSA, Energy Star, etc.).
• Cover with protective cardboard or attach wooden corner protectors or any other protective device.
• Include the installation instructions and necessary hardware.
• Perform the final quality check (cleanliness, squareness, condition of operable parts, etc.).
• Place the product on the tray of the wrapping machine and start the machine.

Performance criteria

• Observance of occupational health and safety rules
• Observance of environmental laws and regulations
• Compliance with work instructions
• Observance of maintenance schedule
• Compliance with the storage or warehousing plan
• Proper application of work techniques
• Concern for using materials sparingly
• Order and cleanliness

Tasks

• Put away the parts or products in their designated areas.
• Clean the tools and equipment.
• Sort and put away all materials used.
• Clean and sweep the work areas.
• Salvage scrap materials for recycling and dispose of waste.
• Report signs of breakage to the maintenance service or person in charge.