Performance criteria

• Compliance with work instructions
• Compliance with procedures or production plan
• Accurate identification of wood species used in cabinet-making, wood-based panels or related materials
• Accurate interpretation of plan
• Concern with making optimum use of the raw material
• Correct visualization of the product to be made

Tasks

• Receive instructions from the person in charge.
• Read the specifications of the product to be made.
• Read the information on the cutting list (materials, identification of pieces, code, dimensions, number of pieces, etc.).
• Select the rough timber planks by species, dimension and quality, or select the wood-based panels according to their dimensions and quality.
• Identify any defects in the wood (natural defects or defects associated with drying, stacking or processing) or defects specific to the panels.
• Determine the parts of the plank to be kept or discarded when cutting the solid wood, or check the computerized cutting list.
• Set aside any solid wood pieces or wood-based panels considered unusable for the project.
• Measure the humidity level of the wood to ensure that it does not exceed the required level.
• Detect any problems and inform the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with procedures or production plan
• Observance of manufacturer’s specifications
• Compliance with quality standards
• Proper application of work techniques
• Proper use of tools, instruments and equipment
• Concern for the attainment of the production objectives
• Concern for using materials sparingly

Tasks

• Ensure that personal protective equipment is in good condition and worn properly.
• Ensure that the workspace is safe (no debris around the dimensioning saw or conventional saw, the dust ventilator open, etc).
• Check the condition of the saw blade and ensure that none of the teeth are bent or broken.
• Remove and replace the saw blade.
• Adjust and true the saw blade.
• Set the cut guides to the prescribed width.
• Ensure that the equipment has safety mechanisms (blade guards, cut guides, etc.) and ensure that they are in good working condition.
• Check the adjustments or have them approved by the person in charge.
• Place the solid wood piece or the panel on the feeder plate of the dimensioning saw or conventional saw.
• Push the solid wood piece or the panel along the feeder plate of the dimensioning saw or conventional saw.
• Check the quality of the cut.
• Detect any problems and inform the person in charge.
• Stack the cut pieces on a cart.
• Fill out the production form.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with procedures or production plan
• Observance of manufacturer’s specifications
• Compliance with quality standards
• Proper application of work techniques
• Proper use of tools, instruments and equipment
• Concern for the attainment of the production objectives
• Concern for using materials sparingly

Tasks

• Ensure that personal protective equipment is in good condition and worn properly.
• Ensure that the workspace is safe (no debris around the horizontal panel saw, dust ventilator open, etc).
• Check the condition of the saw blades (main blade and scoring blade).
• Remove and replace the saw blades.
• Adjust and true the saw blades.
• Set the cut guides.
• Ensure that the equipment has safety mechanisms (riving knife, protective hood, etc.) and ensure that they are in good working condition.
• Check the settings or have them approved by the person in charge.
• Measure the length or width of the piece to be cut and draw the cut line.
• Place the panel on the feeder plate.
• Push the panel along the feeder plate to make a longitudinal cut and then a cross-cut.
• Check the quality of the cut.
• Transfer the cutting plan numbers to the cut pieces.
• Detect any problems and inform the person in charge.
• Stack the panels on a cart.
• Fill out the production form.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with procedures or production plan
• Observance of manufacturer’s specifications
• Compliance with quality standards
• Proper application of work techniques
• Proper use of tools, instruments and equipment
• Concern for the attainment of the production objectives
• Concern for using materials sparingly

Tasks

• Ensure that personal protective equipment is in good condition and worn properly.
• Ensure that the workspace is safe (no debris around the vertical panel saw, dust ventilator open, etc).
• Check the condition of the saw blade.
• Remove and replace the saw blade.
• Adjust the blade.
• Ensure that the equipment has safety mechanisms and ensure that they are in good working condition.
• Check the adjustments or have them approved by the person in charge.
• Position the blade motor housing in accordance with the type of cut (horizontal or vertical).
• Place the panel in the vertical panel saw.
• Activate the mechanism.
• Check the quality of the cut.
• Detect any problems and inform the person in charge.
• Stack the panels on a cart.
• Fill out the production form.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Observance of maintenance schedule
• Proper application of work techniques
• Compliance with storage plan
• Order and cleanliness

Tasks

• Turn off the machine-tool cutters.
• Remove dust from the machine-tool cutters.
• Return the machine-tool cutters to their initial settings.
• Put back the safety guards.
• Close the duster ventilator.
• Put away the tools and accessories.
• Clean and sweep the work area.
• Grade reusable offcuts.
• Report signs of breakage to the maintenance service or person in charge.