Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Clear understanding of the work to be done
• Availability of all materials needed
• Materials in good condition

Tasks

• Receive instructions from the person in charge.
• Read the work order or specifications.
• Verify that materials and tools (hand tools, cleaning products, packaging materials, etc.) are available.
• Select materials, in accordance with instructions.
• Verify the compliance of materials and tools.
• Verify the compliance of protective equipment, and put it on.
• Replace defective materials, if necessary.
• Place materials in the designated areas.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with production priorities
• Accurate identification of raw materials needed
• Proper application of work techniques
• Proper supply of workstations without stock shortages
• Respectful exchanges with coworkers
• Accurate calculations and data provided
• Order and cleanliness

Tasks

• Prepare the mix: consult the formula, select the ingredients, calculate the quantities required, weigh the ingredients, etc.
• Make the mix.
• Ensure proper conditioning of the mix.
• Select other raw materials required by different workstations in accordance with the instructions received.
• Prepare extruded parts or rubber preforms.
• Check that raw materials conform with company standards.
• Provide raw materials to labourers who stock different workstations.
• Notify the person in charge when inventories are low.
• Provide data for inventory purposes.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Observance of procedures for operating equipment
• Close collaboration with team members

Tasks

• Help set up moulds.
• Help install and adjust accessories.
• Help dismantle moulds.
• Help dismantle accessories.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Compliance with quality standards
• Staying within the limits of the occupation
• Proper application of work techniques
• Proper application of equipment shutdown procedures
• Proper use of equipment
• Appropriate output maintained on presses
• Immediate notification of any irregularity or problem
• Close collaboration with team members

Tasks

• Prepare the mould.
• Feed raw materials into the press, in accordance with the production process used (injection, compression, transfer moulding).
• Insert materials (input, reinforcement, metal part, etc.) into the moulds.
• Check the parameters of the press (temperature, pressure, speed, quantity, etc.).
• Verify the quality of the parts.
• Detect any irregularities on the press (noise, smell, leak, etc.), and notify the person in charge.
• Remove parts from moulds.
• Perform emergency shutdowns and notify the person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Observance of manufacturer’s specifications
• Proper use of tools
• Meticulous work
• Order and cleanliness

Tasks

• Cut off excess material.
• Trim, sand, polish parts, etc.
• Assemble, glue, spot-weld components, etc.
• Print logos, patterns, instructions, etc.
• Apply coating (silicone, primer, powder coating, etc.).
• Verify the quality of the work.

Performance criteria

• Observance of occupational health and safety rules
• staying within the limits of the occupation
• Appropriate use of measuring instruments
• Compliance with product specifications and quality standards
• Accurate data

Tasks

• Check extruded products (visual inspection, control checklist, measurements, etc.).
• Identify the nonconformity of certain products.
• Correct nonconformity problems that are within the limits of the occupation, if applicable, or send defective products to the designated areas.
• Affix seals or labels on approved products.
• Fill out the control sheets.
• Send approved products to the designated areas.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Observance of manufacturer’s specifications
• Accurate data
• Proper use of equipment

Tasks

• Place products in containers.
• Prepare labels.
• Package and label the containers.
• Make sure the contents and label match.
• Stack containers on pallets.
• Wrap in stretch wrap and affix label.
• Move pallets to the designated area, using manual equipment.

Performance criteria

• Observance of occupational health and safety rules
• Compliance with work instructions
• Observance of maintenance schedule
• staying within the limits of the occupation
• Proper application of work techniques
• Use of appropriate cleaning materials and products
• Cleanliness of press
• Concern for using materials sparingly
• Demonstration of ability to work in a team

Tasks

• Put away and sort all work materials.
• Make sure that all the materials and products needed to clean the press are available.
• Lock out the press according to established procedure.
• Clean the internal and external parts of the press.
• Remove the lock-out on the press according to established procedure.
• Clean and sweep the work area.
• Salvage scrap materials for recycling and dispose of waste.
• Report any breakages to the maintenance department or person in charge.

Performance criteria

• Observance of occupational health and safety rules
• Observance of classification codes
• Appropriate grinding of materials
• Maximum scrap recovery
• Concern for environmental protection

Tasks

• Sort scrap.
• Dispose of other waste.
• Turn on, feed and monitor the equipment.
• Collect the ground material.
• Bag and label ground material.